Web Operations 178
Enter the port value of SMTP server. For details, see Table 5-25.
Enter the user name and password of SMTP server. For details, see Table
5-25.
Enter the sender’s email address.
In the Encrypt list, select an encryption type from NONE, SSL, and TLS.
For details, see Table 5-25.
Supports Chinese, English, and Arabic numerals. You can enter maximum
63 characters.
Enter the email address of mail receiver. You can enter maximum three
email addresses separated by colon.
This is the interval that the system sends an email for the same type of
alarm event, which means, the system does not send an email upon any
alarm event.
The interval ranges from 0 seconds to 3600 seconds. 0 means that there
is no interval.
This setting helps to avoid the large amount of emails caused by frequent
alarm events.
The system can send a test email to check the connection.
Select the Health Enable check box, and then enter the interval. The
system can send a test email to check the connection according to the
interval.
The value ranges from 30 minutes to 1440 minutes.
Click Test to test the email sending and receiving function. If the
configuration is correct, the receiver’s email account will receive the test
email. Before testing, click Save to save the settings.
Table 5-25 Provides configuration instructions of common email boxes for your
reference.
Table 5-25 Common mailbox configuration parameters
Do not select NONE for encrypt
type.
The mailbox must have applied
SMTP service.
The password must be an
"authorized password". Both the QQ
login password and email login
password are invalid.
Obtain the authorized password when
your mailbox is applying for SMTP
service.
To Next Page
Loading...
Need help?
General