Web Operations 201
Select a value for bit rate of video.
Select the window split mode and channel for recoding under the
zero-channel function. This setting does not affect the window split mode
during multi-channel preview.
Click Save. Step 4
The multi-channel preview icon is displayed on the PREVIEW interface. For details, see
"5.2.1.5.3 Configuring Zero-Channel Settings."
5.3.5.1.4 Configuring Preview Overlay Settings
You can configure to display system time, vehicle license number, and speed on each channel
window in the live view screen.
Select SETUP > SYSTEM > DISPLAY > Preview Overlay. Step 1
The Preview Overlay interface is displayed. See Figure 5-88.
Preview overlay Figure 5-88
Configure the parameters. For details, see Table 5-35. Step 2
Table 5-35 Preview overlay setting parameters description
Select the Time Display check box, the Setup button is displayed. Then click
Setup, the time is displayed on the channel window, and then drag it to a
proper location.
Select the License No. check box, the Setup button is displayed. Then click
Setup, the license number is displayed on the channel window, and then drag it
to a proper location.
Select the Speed check box, the Setup button is displayed. Then click Setup,
the speed title is displayed on the channel window, and then drag it to a proper
location.
Click Save. Step 3
To Next Page
Loading...
