Web Operations 206
Select the Modify Password check box, and then enter old password, new password, Step 2
and confirm password in the corresponding box.
(Optional) Set the reserved email address.
Step 3
The system pops up a message to ask you whether sync to the remote devices that are
accessed through the default protocol. Make your selection according to your actual
need.
If you forgot the password of admin, you can reset the password through the reserved
email address. For details, see "5.3.5.3.3 Reset password."
Click Save. Step 4
The new password can be set from 8 characters through 32 characters and
contains at least two types from number, letter and special characters (excluding '
" ; : &).Please enter a strong password according to the password strength
indication.
The user with Account authority can also modify the password of other users.
5.3.5.3.2 Group Management
You can perform the operations to manage the group account, such as adding a group, deleting
a group, and modifying a group.
Select SETUP > SYSTEM > ACCOUNT > Group. Step 1
The Group interface is displayed. See Figure 5-94.
Group management Figure 5-94
Click Add Group. Step 2
The Add Group interface is displayed. See Figure 5-95.
To Next Page
Loading...
Need help?
General