Local Configurations 43
Select Main Menu > SETTING > DISPLAY. Step 1
The DISPLAY interface is displayed.
Click Setup next to Zero-Ch Encode.
Step 2
The Zero-Ch Encode interface is displayed. See Figure 4-24.
Zero-Channel Encode Figure 4-24
Select the Enable check box. Step 3
Configure the parameters. For details, see Table 4-10. Step 4
Table 4-10 Zero-Channel encode parameters description
Displays the video encode standard. The Device only supports H.264.
In the Resolution list, select the video resolution. The higher the value is,
the better the image quality will become.
Configure the frames per seconds for video. The larger the value is, the
smoother and more vivid the image will be.
Select a value for bit rate of video.
Select the window split mode and channel for recoding under the
zero-channel function. This setting does not affect the window split mode
during multi-channel preview.
Configuring Zero-Channel Settings overlay. Step 5
1) Click Overlay.
The Overlay interface is displayed. See Figure 4-25.
Overlay Figure 4-25
To Next Page
Loading...
Need help?
General