Dahua MCVR6204 User Manual

Local Configurations 45
Parameter
Description
Channel
Select a channel that is connected to PTZ camera.
Protocol
Select the protocol that matches the PTZ camera.
Address
Enter the address for PTZ camera.
The entered address must be the same with the address configured on
the PTZ camera; otherwise the PTZ camera cannot be controlled from
the Device.
Baud Rate
Select the baud rate for the PTZ camera.
Data Bit
The default value is 8.
Stop Bit
The default value is 1.
Parity
The default value is None.
 If Channel 9 to Channel 12 is selected, in the PTZ Type list, select Remote. See
Figure 4-27.
PTZ settings (Remote) Figure 4-27
Click Save. Step 4
Click Copy to copy the settings to other channels.
4.2.2.2 Working with PTZ Control Panel
Right-click on the live view screen and then select PTZ. The PTZ control panel is displayed.
See Figure 4-28.

Dahua MCVR6204 Specifications

General

Brand	Dahua
Model	MCVR6204
Category	DVR
Language	English