Local Configurations 63
4.3.1.2 Configuring Camera Parameters
You can configure the camera parameters such as bit rate, overlay, and snapshot.
4.3.1.2.1 Configuring Encode Setting
You can configure encode settings for main stream and sub stream.
Select Main Menu > SETTING > ENCODE. Step 1
The ENCODE interface is displayed, see Figure 4-49.
Encode settings Figure 4-49
Configure the parameters. For details, see Table 4-20. Step 2
Table 4-20 Camera parameters description
In the Channel list, select a channel.
In the Type list, select General, MD (Motion Detect), or Alarm. The three
types correspond to different parameters.
Displays the video encode standard.
Enable the smart code function. This function can reduce the video bit
stream to maximize the storage space.
In the Resolution list, select the video resolution. The higher the value is, the
better the image quality will become.
Configure the frames per seconds for video. The larger the value is, the
smoother and more vivid the image will be. The frame rate changes along the
resolution.
To Next Page
Loading...
Need help?
General