Local Configurations 67
Time period Figure 4-52
2) Select a channel.
3) In the Period list, select a day, enter the specific time in the period box, and then
select the check box.
4) Click OK.
Click OK. Step 5
The ENCODE interface is displayed.
Click OK. Step 6
4.3.1.3 Viewing Status of Remote Device
You can view the remote device information such as connection status, IP address, and alarm
events. This function is supported only on Channel 9 to Channel 12.
Select Main Menu > INFO > REMOTE DEVICE INFO. The Channel Status interface is
displayed. See Figure 4-53. For the status icons description, see Table 4-23.
To Next Page
Loading...
Need help?
General