Dahua MCVR6204 - Page 81

Local Configurations 70
The NETWORK interface is displayed.
Click NETWORK SETTING. Step 2
The NETWORK SETTING interface is displayed.
Configure DDNS settings. Step 3
1) Double-click DDNS.
The DDNS interface is displayed. See Figure 4-55.
DDNS Figure 4-55
2) Select the Enable check box.
3) Configure the parameters. For details, see Table 4-24.
Table 4-24 DDNS setting parameters description
Parameter
Description
DDNS Type
Name and address of DDNS service provider.
NO-IP DDNS: dynupdate.no-ip.com

CN99 DDNS: members.3322.org

Dyndns DDNS: members.dyndns.org

Server IP
Domain Name
The domain name for registering on the website of DDNS service provider.
Username
Enter the user name and password obtained from DDNS service provider.
You need to register (including user name and password) on the website
of DDNS service provider.
Password
Interval
The connection interval between the Device and DDNS server.
Test
Click Test to check whether the registration is succeeded.
4) Click OK.
Select the DDNS check box, and then click Save. Step 4
The NETWORK interface is displayed.
Click OK. Step 5
4.3.2.2 Configuring EMAIL Settings
You can configure the email settings to enable the system to send the email as a notification
when there is an alarm event occurs.
Select Main Menu > SETTING > NETWORK. Step 1
The NETWORK interface is displayed.