Local Configurations 75
Preparation
The Device is connected into the Internet.
DMSS Client is downloaded and installed on you mobile phone.
Procedure
Select Main Menu > SETTING > NETWORK. Step 1
The NETWORK interface is displayed.
Click NETWORK SETTING. Step 2
The NETWORK SETTING interface is displayed.
Configure P2P settings Step 3
1) Double-click P2P.
The P2P interface is displayed, see Figure 4-58.
P2P Figure 4-58
2) On your mobile phone, open the DMSS app.
3) Scan the device serial number to add the device to DMSS.
Please scan the QR code on the actual interface of Device.
4) Select the Enable check box.
5) Click Save.
After connection succeeded, you can view the connection status of device.
Select the P2P check box, and then click Save. Step 4
The NETWORK interface is displayed.
Click OK. Step 5
Adding Device into Mobile Phone Client
To use this function, take adding device into mobile phone client as an example.
Open the application, tap CMAERA. Step 1
The Live Preview interface is displayed.
Add a device. Step 2
To Next Page
Loading...
