Datalogic Gryphon I GD44XX - Scan Mode; Scanning Features

Enter/Exit Programming Mode
Product Reference Guide 109
SCANNING FEATURES
Scan Mode
Selects the reader’s scan operating mode. See page 294 in “References” for
descriptions.
$CSNRM00(CR)
Scan Mode = Trigger Single
DEFAULT
$CSNRM01(CR)
Scan Mode = Trigger Hold Multiple
$CSNRM02(CR)
Scan Mode = Trigger Pulse Multiple
$CSN-
Scan Mode = Flashing
$CSNRM04(CR)
Scan Mode = Always On
$CSN-
Scan Mode = Stand Mode
Options concerning Stand Mode behavior are available at the follow-
ing feature,
Stand Operation .