Product Reference Guide
48
RS-232/USB-COM INTERFACES
INTERCHARACTER DELAY on page 49
BEEP ON ASCII BEL on page 49
BEEP ON NOT ON FILE on page 50
ACK NAK OPTIONS on page 51
ACK CHARACTER on page 52
NAK CHARACTER on page 52
ACK NAK TIMEOUT VALUE on page 53
ACK NAK RETRY COUNT on page 53
ACK NAK ERROR HANDLING on page 54
INDICATE TRANSMISSION FAILURE on page
54
DISABLE CHARACTER on page 55
ENABLE CHARACTER on page 55
The programming bar codes in this chapter allow modifications to the stan-
dard RS-232 and USB-Com interfaces. Reference Appendix B, Standard
Defaults for a listing of standard factory settings.
To Next Page
Loading...
Need help?
General
