To Next Page

To Previous Page

Enter/Exit Programming Mode

114

Gryphon™ I GD44XX/GBT4400/GM440X

Stand Illumination Control

Controls the illumination status while the reading mode is stand mode and

the reader is attempting to detect objects.

DEFAULT

$CSMIL00(CR)

Stand Illumination Control = OFF

$CSMIL01(CR)

Stand Illumination Control = ON

$CSMIL02(CR)

Stand Illumination Control = Dim

Motion Still Timeout

Motion Still Timeout specifies the waiting time after which no motions is

detected. When no motion is detected for period of time longer than the set

Motion Still Timeout period, the scanner assumes it is in a motionless con-

dition. The selectable setting are from 500 to 25,500 milliseconds in 100

llisecond increments. The default is 2 seconds. This option relates to such

features and the Aimer On timing and Stand Mode Object Sense scanning

with respect to motion. See page 305 in "References" for detailed informa-

tion on setting this feature.

$CMOTO/r

Select Motion Still Timeout Setting

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar code

left followed by the digits from the Alphanumeric

characters in

Appendix D, Keypad

representing

your desired character(s). En

d by scanning the

ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL

bar code to abort

and not save the entry string. You can then start again

at the beginning.

CANCEL

DEFAULT

14 = Motion Still Timeout for 2 seconds

Datalogic Gryphon I GD44XX User Manual

Questions and Answers: