To Next Page

To Previous Page

Enter/Exit Programming Mode1D Code Selection

128

Gryphon™ I GD44XX/GBT4400/GM440X

UPC-A 2D Component

This feature enables/disables a requirement that a 2D label component be

decoded when a base label of this symbology is decoded.

DEFAULT

$CAB2D00(CR)

EAN-13 2D Component =

Disable (2D component not required)

$CAB2D01(CR)

EAN-13 2D Component =

2D component must be decoded

UPC-E

The following options apply to the UPC-E symbology.

UPC-E Enable/Disable

When disabled, the reader will not read UPC-E bar codes.

$CEBEN00(CR)

UPC-E = Disable

$CEBEN01(CR)

UPC-E = Enable

DEFAULT

Datalogic Gryphon I GD44XX User Manual

Questions and Answers: