To Next Page

To Previous Page

References

286

Gryphon™ I GD44XX/GBT4400/GM440X

5. Scan the ENTER/EXIT bar code once again to exit Programming Mode.

6. The resulting message string would ap

pear as follows:

Scanned bar code data: 12345

Resulting message string output: $12345

Global AIM ID

This feature enables/disables addition of AIM IDs for all sym-

bology types.

AIM label identifiers (as opposed to custom characters you select yourself as

with label identifiers) can be included with scanned bar code data. AIM label

identifiers consist of three characters as follows:

• A close brace character (ASCII ‘]’), followed by...

• A code character (see the table below), followed by...

• A modifier character (the modifier ch

aracter is symbol dependent).

SYMBOLOGY CHAR SYMBOLOGY CHAR

UPC/EAN

a. UPC-A and UPC-E labels are converted to EAN 13 when adding AIM IDs.

Code 128/GS1-128

Code 39 and



Code 32

DataBar Omnidirectional,

DataBar Expanded

Codabar

Standard 2 of 5

Interleaved 2 of 5

ISBN

b. ISBN (X with a 0 modifier character)

Code 93

Code 11

Figure 17. AIM ID

Prefix SuffixLabel ID Label IDBar Code DataAIM ID

Datalogic Gryphon I GD44XX User Manual

Questions and Answers: