Enter/Exit Programming Mode Aztec Code
220
Gryphon™ I GD44XX/GBT4400/GM440X
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for Aztec Code Length
Control. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Length Mode. Characters can
be set
from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 283 for detailed instructions on setting this feature.
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at
left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). En
d by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL
bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
Length 2 is 3,832 Characters
To Next Page
Loading...
Need help?
General
