Datamax E-Class Mark II Programmer's Manual

Appendix G – Bar Code Details
Class Series 2 Programmer’s Manual 225
DPL field record, QR Code bar code, Cell Size = 0.08 inch square, positioned at X =
.1” and Y = .1”, ECC = L, Mask = Automatic, Data Input Mode = Manual - Kanji:
1W1D88000001000102,LM,K<0x81><0x40><0x81><0x41><0x81><0x42><0x0D>
DPL field record, QR Code bar code, Cell Size = 0.04 inch square, positioned at X =
.1” and Y = .1”, ECC = L, Mask = Automatic, Data Input Mode = Manual - Kanji (in
Hex/ASCII format):
1W1D4400000100010L8m,K814081418142<0x0D>
DPL field record, QR Code bar code, Cell Size = 0.01 inch square, positioned at X =
.1” and Y = .1”, ECC = M, Mask = Automatic, Data Input Mode = Automatic:
1W1d1100000100010Pallet 35FGA, Box 55367, Datamax Corp, Orlando,
Florida 32707<0x0D><0x0D>
W1f / W1F: Aztec
Valid Characters: All ASCII characters, depending upon the selected options.
Variable Length (W1f): This two dimensional bar code holds a large amount of data in a
small area and can provide a high level of error checking.
Specified Length (W1F): With a string four-digit length specifier, values 0x00 through
0xFF to be included within the data strings without conflicting with the DPL format
record terminators.
Syntax (spaces added for readability):
a W1 b c d eee ffff gggg [hhhh] i jjj kk…k
Where:

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz