Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 53
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Maximum Length Ignore
SM
0, 1
0 =
Normal processing,
1 = Ignore
Communications N/A
Maximum Length
ML
0 – 9999 1/100 inch Media Settings
<STX>M
Media Type
MT
D, T
D = Direct,
T = Thermal Transfer
Media Settings (1) N/A
Menu Mode
MM
U, A
U = User,
A = Advanced
System Settings N/A
Module Command
MCC
Z, G
B
See Table 5-4. N/A N/A
Network Configuration
(for firmware versions
14.00 and later)
NE
G, WE, WIFI, DV1,
DV2, SV1
See command
(NE) Network
Configuration
N/A N/A
Network Setup
(for firmware versions
13.99 and earlier)
NT
A, B, C, D, E, F, G,
I, m, N, P, S, T, U,
W, w, X, Y, Z, $
See Table 5-5. N/A N/A
No Reprint
NR
Y, N
Y = Enabled,
N = Disabled
N/A N/A
Option Feedback
OF
D, Rx, S See Table 5-6. Communications N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz