Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
54 Class Series 2 Programmer’s Manual
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Paper Empty
PO
0 – 9999 1/100 inch Media Settings N/A
Paper Value
PV
0 – 255 N/A Media Settings N/A
Parallel Direction
PP
xz See Table 5-7. Communications N/A
Password Set
PW
A – Z,
0 – 9
Four characters
(or, if security is
enabled then eight
characters).
System Settings N/A
Pause Mode
PM
Y, N
Y = Enabled,
N = Disabled
System Settings
<STX>J
Peel Mode
PE
Y, N
Y = Enabled,
N = Disabled
System Settings N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz