Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
56 Class Series 2 Programmer’s Manual
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Print Speed
pS
Alpha character
Model specific
ranges; see
Appendix L.
Print Control
Pa
Query Configuration
QQ
Q, K N/A Configuration Label N/A
Reflective Paper Value
RV
0 – 255 N/A Media Settings N/A
Retract Delay
RW
1 – 255
Specified value times
ten milliseconds
Printer Options N/A
Rewinder Adjust
RR
-xx, +yy
Applied torque,
where -30 to +15 is
the valid range.
Printer Options N/A
Rewinder Equipped
RM
A/Y, E, N/D
A or Y = Auto,
E = Enabled,
N or D = Disabled
Printer Options N/A
RFID Configuration
RI
A, B, D, E, L, M, N,
P, R, S, T, U, V, W
See Table 5-8. Printer Options N/A
Ribbon Low Diameter
RL
100 – 200 1/100 in. Media Settings N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz