Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 57
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
Ribbon Low Pause
RP
Y, N
Y = Enabled,
N = Disabled
Media Settings N/A
Ribbon Low Signal
RS
3, 4
3 = Active Low,
4 = Active High
Print Options N/A
Ribbon Saver Enable
RE
A/Y, E, N/D
A or Y = Auto,
E = Enabled,
N or D = Disabled
Printer Options
<STX>R
Row Adjust
[1]
RA
xxxx dots
Model specific; see
Appendix K,
and Row Adjust Fine
Tune
Print Control (6) N/A
Row Adjust Fine Tune
RF
+ / – dots
Resolution specific;
see Appendix K.
Printer Control N/A
Row Offset
RO
0 – 9999 1/100 in. Print Control
Rnnnn
SOP Adjust
[1]
SA
0 – 255
(128 nominal)
N/A,
see Row Adjust Fine
Tune
N/A
<STX>O
SOP Emulation
SE
A, L, P, D
A = Allegro,
L = Prodigy Plus,
P = Prodigy,
D = Disable
System Settings N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz