Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
80 Class Series 2 Programmer’s Manual
DPAC Version 2 WIFI Configuration Parameters – Identifier ‘DV2’
The ‘DV2’ WIFI sub-group contains the configuration parameters that are specific to
the DPAC Version 2 (Veyron) WIFI radio module used by Datamax-O’Neil. The ‘Item-
Value’ pairs within the ‘DV2’ sub-group of the ‘WIFI’ sub-group are defined by the
following table:
Item
Number
Name Available
to User
(Y/N)
Value Type Description
1 Network Type Y Decimal Value that represents a Valid
Network Type for the DPAC Version 2
module.
AD-HOC = 0
Infrastructure = 1
2 WIFI Security Type Y Decimal Value that represents the DPAC
Version 2 Security Codes supported.
Security Disabled = 0
WEP, 64 Bit Key = 1
WEP, 128 Bit Key = 2
WPA-PSK = 3
WPA CISCO LEAP = 4
TKIP+40Bit WEP using EAP (LEAP) = 5
TKIP+128Bit WEP using EAP (LEAP) = 6
TKIP+40Bit WEP using WPA-PSK = 7
TKIP+128Bit WEP using WPA-PSK = 8
WPA2-PSK = 9
WPA/WPA2 TLS = 10
WPA/WPA2 PEAP = 11
WPA/WPA2 TTLS = 12
3 WIFI Authentication
Type
Y Decimal Value that represents the DPAC
Version 2 Authentication Types
supported (Auto, Open, Shared
Key, EAP, etc.).
Automatic = 0
Open = 1
Shared Key = 2

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz