Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 81
SILEX Version 1 WIFI Configuration Parameters – Identifier ‘SV1’
The ‘SV1’ WIFI sub-group contains the configuration parameters that are specific to
the SILEX Version 1 WIFI radio module used by Datamax-O’Neil. The ‘Item-Value’
pairs within the ‘SV1’ sub-group of the ‘WIFI’ sub-group are defined by the following
table:
Item
Number
Name Available
to User
(Y/N)
Value Type Description
1 Network Type Y Decimal Value that represents a Valid Network
Type for the SILEX Version 1 module.
AD-HOC = 0
Infrastructure = 1
2 Encryption Type Y Decimal Value that represents the SILEX Version
1 Encryption Types supported.
Security disabled = 0
WEP64 = 1
WEP128 = 2
WPA = 3
WPA2 = 4
3 Authentication Type Y Decimal Value that represents the SILEX Version
1 Authentication Types supported (Auto,
Open, Pre-Shared Key, EAP, etc.).
Open System = 0
Shared Key = 1
Pre-Shared Key = 2
TTLS = 3
LEAP = 4
PEAP = 5
EAP-FAST = 6
TLS = 7
4 Inner
Authentication Type
Y Decimal Value that represents the Inner
Authentication Type used if a Tunneled
EAP method is specified.
None = 0
PAP = 1
MSCHAP_V2 = 2
5 Use WPA Group Key Y Boolean Enables or Disables use of the WPA
Group Key.

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz