Dell EMC PowerEdge XR11 User Manual

Table 2. Features available on the front view of Front Accessed 4 x 2.5-inch drive
configuration (continued)
Item Ports, panels, or slots Icon Description
8 USB 3.0 port This port is USB 3.0-
compliant.
9 VGA port Enables you to connect a
display device to the system.
10 4 x 25 GbE LOM ports
The LOM ports that are
integrated on the system
board provide network
connectivity. These LOM
ports can also be shared with
iDRAC when iDRAC network
settings is set to shared
mode.
11 System identification button Press the system ID button:
● To locate a particular
system within a rack.
● To turn the system ID on
or off.
To reset iDRAC, press and
hold the button for more than
16 seconds.
NOTE:
● To reset iDRAC using
system ID, ensure that
the system ID button is
enabled in the iDRAC
setup.
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than 5
seconds) to enter the
BIOS progress mode.
12 Power button control panel N/A Contains the power button,
iDRAC Direct micro port, and
the iDRAC Direct status LED.
NOTE: For more information, see the Dell EMC PowerEdge XR11 Technical Specifications on the product documentation
page.
10 PowerEdge XR11 system overview

Dell EMC PowerEdge XR11 Specifications

General

Brand	Dell
Model	EMC PowerEdge XR11
Category	Server
Language	English