Table 8-3. Warning Events (continued)
DC I
2
C Bus Failure
Refer to “Isolating a Power Supply Problem” on page 7-7.
DD Power Supply x fan has failed,
Redundancy may be at risk
The subcode indicates which power
supply fan is affected
Subcode 01: 1st PS fan from bottom
Subcode 02: 2nd PS fan from bottom
DF Power Good signal changed from 2 to 1
Power Supplies
F6 No drive installed. A drive has never
been installed.
Install at least one drive.
Chapter 8. Error Codes 8-13
To Next Page
Loading...
