Dell Pro Max 16 - Display Cable; Removing the Display Cable

Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the WWAN module, if available.
5. Install the wireless card.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Display cable
Removing the display cable
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the WWAN module, if available.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the display panel.
About this task
The following image indicates the location of the display cable and provides a visual representation of the removal procedure.
104
Removing and installing Field Replaceable Units (FRUs)