Dell Pro Max 16 - Display Bezel; Removing the Display Bezel

2. Install the wireless card.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Display bezel
Removing the display bezel
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the WWAN module, if available.
5. Remove the display assembly.
About this task
NOTE: The display-hinge caps are a part of the display bezel.
The following image indicates the location of the display bezel and provides a visual representation of the removal procedure.
90
Removing and installing Field Replaceable Units (FRUs)