VPanel Window and Functions
9
Chapter 1 Operation Screen
No. Display Explanation
BUR
Displays the status of the function (Intelligent Tool Control) for automatically
switching the current milling bur with the set milling bur. Also, hover the
mouse pointer over the displayed number to display the name, work time, and
replacement time of the milling bur. The tool's remaining service life is indicated
by the length of the arc that surrounds the number. When the tool approaches
the end of its service life, the arc color changes to yellow. When the service life is
exceeded, the arc color changes to red.
Example
Usage: less than 75%
(green graph)
Example
Usage: 75% or more
(yellow graph)
Example
Usage: 100% or more
(red graph)
It is almost time to
replace the milling bur.
It is past time to replace
the milling bur.
"Milling bur management" dialog box
" P. 17 "Intelligent Tool Control (ITC) Function Settings"
" P. 45 "Milling Bur Replacement Time"
JOB LIST
Displays the data being milled, the milling data in standby, and the milling progress.
CURRENT
PHASE
Displays the operation status, spindle rotating speed, milling time, etc.
Displays the status of the connected machine.
Displays the spindle rotating speed of the connected machine.
Displays the name and work situation of the milling bur currently in use.
For example, "13h00m/15h00m" indicates that "13h00m" is the work
time and "15h00m" is the replacement time of the tool.
Outputs the milling data.
" P. 40 "STEP 6: Outputting Milling Data and Starting Milling"
Cancels output of milling data and other functions.
Allows for registration and selection of milling burs.
" P. 15 ""Milling bur management" Dialog Box"
Display the settings window.
" P. 10 ""Settings" Tab"
" P. 11 ""Maintenance" Tab"
" P. 12 ""Mail" Tab"
" P. 13 ""VPanel" Tab"
Click this to access the DGSHAPE Corporation website.
To Next Page
Loading...