Digi Connect IT 16 User Manual

Interfaces Wide Area Networks (WANs)
Digi Connect IT® 16/48 User Guide
107
3. Create a new WWAN or edit an existing one:
n To create a new WWAN named my_wwan:
(config)> add network interface my_wwan
(config network interface my_wwan)>
n To edit an existing WWAN named my_wwan, change to the my_wwan node in the
configuration schema:
(config)> network interface my_wwan
(config network interface my_wwan)>
4. Set the appropriate firewall zone:
(config network interface my_wwan)> zone zone
(config network interface my_wwan)>
See Firewall configuration for further information.
5. Select a cellular modem:
a. Enter modem device ? to view available modems and the proper syntax.
(config network interface my_wwan)> modem device ?
Device: The modem used by this network interface.
Format:
wwan
Current value:
(config network interface my_wwan)> device
b. Set the device:
(config network interface my_wwan)> modem device
(config network interface my_wwan)>
6. Optional WWAN configuration items:
a. Set theSIM matching criteria to determine when this WWAN should be used:
(config network interface my_wwan)> modem match value
(config network interface my_wwan)>
Where value is one of:
n any
n carrier
Set the cellular carrier must be in active for this WWAN to be used:
i. Use ? to determine available carriers:
(config network interface my_wwan)> modem carrier
Match SIM carrier: The SIM carrier match criteria. This

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English