Digi Connect IT 16

Get started with Connect IT 16/48
This section explains what comes with each Connect IT model, how to install the necessary software,
and how to connect the hardware.
1. Verify product components.
2. Cellular ONLY: Insert the CORE module.
3. Connect the power supplies and fans.
4. Optional: Connect SFP+ modules.
5. Connect the hardware to a network.
6. Access the device from the web UI.
7. Update the firmware on the Connect IT.
8. Change the password.
9. Administrators only: Additional configuration to the Connect IT can be done in Remote Manager
or in the Connect IT's local web user interface.
10. Mount the Connect IT to a rack.
11. Connect equipment to the Connect IT serial ports.
Verify product components
Verify that you have the following included equipment.
Digi Connect IT® 16/48 User Guide
19