Digi Connect IT 16 User Manual

File system Upload and download files
Digi Connect IT® 16/48 User Guide
657
Download files
1. Log into the Connect IT 16/48 WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click  to open the directory.
4. Highlight the appropriate file and click  (download).
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the Connect IT 16/48 device
To copy a file from a remote host to the Connect IT 16/48 device, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n hostname-or-ip is the hostname or ip address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied to the
Connect IT 16/48 device.
n local-path is the location on the Connect IT 16/48 device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect IT 16/48 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect IT 16/48-
21.2.39.67.bin local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
Connect IT 16/48-21.2.39.67.bin 100% 36MB 11.1MB/s 00:03
>

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English