Digi Connect IT 16

Services Allow remote access for web administration and SSH
Digi Connect IT® 16/48 User Guide
329
Allow remote access for web administration and SSH
By default, only devices connected to the Connect IT 16/48's LAN have access to the device via web
administration and SSH. To enable these services for access from remote devices:
n The Connect IT 16/48 device must have a publicly reachable IP address.
n The External firewall zone must be added to the web administration or SSH service. See
Firewall configuration for information on zones.
n See Set the idle timeout for Connect IT 16/48 users for information about setting the inactivity
timeout for the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
5. Select External.
6. Click Apply to save the configuration and apply the change.