Digi Connect IT 16 User Manual

System administration Configuration files
Digi Connect IT® 16/48 User Guide
606
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Save configuration to a file
You can save your Connect IT 16/48 device's configuration to a file and use this file to restore the
configuration, either to the same device or to similar devices.
WebUI
This procedure creates a binary archive file containing the device's configuration, certificates and
keys, and other information.
1. Log into the Connect IT 16/48 WebUI as a user with Admin access.
2. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
3. In the Configuration backup section:
a. (Optional) To encrypt the configuration using a passphrase, for Passphrase
(save/restore), enter the passphrase.
b. Click SAVE.
The file will be downloaded using your browser's standard download process.
Command line
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the following:
> system backup path [passphrase passphrase] type type

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English