EasyManuals Logo
Home>Digi>Server>Connect IT 16

Digi Connect IT 16 User Manual

Digi Connect IT 16
756 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
Virtual Private Networks (VPN) IPsec
Digi Connect IT® 16/48 User Guide
265
l Specify the hostname or IP address by using ping_host or ping_host6:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_host host
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
l (Optional) Set the size, in bytes, of the ping packet by using ping_size or ping_
size6:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_size [num]
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n dns (IPv4) or dns6 (IPv6): Tests connectivity by sending a DNS query to the
specified DNS server.
l Specify the DNS server. Allowed value is the IP address of the DNS server.
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> dns_server ip_address
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n dns_configured (IPv4) or dns_configured6 (IPv6): Tests connectivity by sending a
DNS query to the DNS servers configured for this interface.
n http (IPv4) or http6 (IPv6): Tests connectivity by sending an HTTP or HTTPS GET
request to the specified URL.
l Specify the url. Allowed value uses the format http[s]://hostname/[path].
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> http_url url
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
n interface_up (IPv4) or interface_up6 (IPv6): : The interface is considered to be
down based on the interfaces down time, and the amount of time an initial
connection to the interface takes before this test is considered to have failed.
l (Optional) Set the amount of time that the interface can be down before this
test is considered to have failed:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> interface_down_time value
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_down_time to ten minutes, enter either 10m or
600s:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi Connect IT 16 and is the answer not in the manual?

Digi Connect IT 16 Specifications

General IconGeneral
BrandDigi
ModelConnect IT 16
CategoryServer
LanguageEnglish

Related product manuals