Digi Connect IT 16 User Manual

Applications Digidevice module
Digi Connect IT® 16/48 User Guide
459
1. In Remote Manager, click Documentation > API Explorer.
2. Select the device to use as the SCI target:
a. Click SCI Targets.
b. Click Add Targets.
c. Enter or select the device ID of the device.
d. Click Add.
e. Click OK.
3. Click Examples > SCI > Data Service > Send Request.
Code similar to the following will be displayed in the HTTP message body text box:
<sci_request version="1.0">
<data_service>
<targets>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
</targets>
<requests>
<device_request target_name="myTarget">
my payload string
</device_request>
</requests>
</data_service>
</sci_request>
Note The value of the target_name parameter in the device_request element must
correspond to the target parameter of the device_request.register function in the Python
script. In this example, the two are the same.
4. Click Send.
Once that the request has been sent to the device, the handler on the device is executed.
n On the device, you will receive the following output:
>>> received request
my payload string
for target myTarget
>>>
n In Remote Manager, you will receive a response similar to the following:
<sci_reply version="1.0">
<data_service>
<device id="00000000-00000000-0000FFFF-A83CF6A3"/>
<requests>
<device_request target_name="myTarget" status="0">OK</device_
request>
</requests>
</device>
</data_service>
</sci_request>
Example: Use digidevice.cli with digidevice.device_request

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English