System administration Update cellular module firmware
Digi Connect IT® 16/48 User Guide
595
25.20.664_CUST_044_3
25.20.666_CUST_067_1
25.20.663_CUST_040
>
4. Perform an OTAfirmware update:
n To perform an OTAfirmware update by using the most recent available modem
firmware from the Digi firmware repository, type:
> modem firmware ota update
Checking for latest Generic firmware ...
Retrieving modem firmware list ...
Newest firmware version available to download is '25.20.666_CUST_067_
1'
Retrieving download location for modem firmware '25.20.666_CUST_067_1'
...
>
n To perform an OTAfirmware update by using a specific version from the Digi firmware
repository, use the version parameter to identify the appropriate firmware version as
determined using the modem firmware ota check or modem firmware ota list
command. For example::
> modem firmware ota update version 24.01.5x4_ATT
Retrieving download location for modem firmware '24.01.5x4_ATT' ...
Downloading modem firmware '24.01.5x4_ATT' to '/opt/LE910C4_NF/Custom_
Firmware' ...
Modem firmware '24.01.5x4_ATT' downloaded
Updating modem firmware ...
Programming modem firmware ...
Found modem ...
Validate modem firmware ...
Getting ready for update ...
Stopping services ...
Running update pass 1 of 3 ...
Restarting services ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To Next Page
Loading...
Need help?
General