Digi Connect IT 16 User Manual

Diagnostics View system and event logs
Digi Connect IT® 16/48 User Guide
663
5. Click  to download the system log.
Command line
1. Log into the Connect IT 16/48 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use show log at the Admin CLIprompt:
> show log
Timestamp Message
-------------- -----------------------------------------------------------
--
Nov 26 21:54:34 Connect IT 16/48 netifd: Interface 'interface_wan' is
setting up now
Nov 26 21:54:35 Connect IT 16/48 firewalld[621]: reloading status
...
>
3. (Optional) Use the show log number num command to limit the number of lines that are
displayed. For example, to limit the log to the most recent ten lines:
> show log number 10
Timestamp Message
-------------- -----------------------------------------------------------
--
Nov 26 21:54:34 Connect IT 16/48 netifd: Interface 'interface_wan' is
setting up now
Nov 26 21:54:35 Connect IT 16/48 firewalld[621]: reloading status
...
>
4. (Optional) Use the show log filter value command to limit the number of lines that are
displayed. Allowed values are critical, warning, info, and debug. For example, to limit the
event list to only info messages:
> show log filter info
Timestamp Type Category Message
---------------- ------- --------- ----------------------------------------
---
Nov 26 22:01:26 info user
name=admin~service=cli~state=opened~remote=192.168.1.2
Nov 26 22:01:25 info user
name=admin~service=cli~state=closed~remote=192.168.1.2

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English