Digi Connect IT 16 User Manual

Command line interface Configuration mode
Digi Connect IT® 16/48 User Guide
712
Either of these methods will display the following information:
(config)> service ssh ?
SSH: An SSH server for managing the device.
Parameters Current Value
--------------------------------------------------------------------------
enable true Enable
key [private] Private key
port 22 Port
Additional Configuration
--------------------------------------------------------------------------
acl Access control list
mdns
(config)> service ssh
4. Lastly, to display allowed values and other information for the enable parameter, use one of
the following methods:
n At the config prompt, enter service ssh enable ?:
(config)> service ssh enable ?
n At the config prompt:
a. Enter service to move to the service node:
(config)> service
(config service)>
b. Enter ssh to move to the ssh node:
(config service)> ssh
(config service ssh)>
c. Enter enable ? to display help for the enable parameter:
(config service ssh)> enable ?
(config service ssh)>
Either of these methods will display the following information:
(config)> service ssh enable ?
Enable: Enable the service.
Format: true, false, yes, no, 1, 0
Default value: true
Current value: true
(config)> service ssh enable

Digi Connect IT 16 Specifications

General

Brand	Digi
Model	Connect IT 16
Category	Server
Language	English