Digital Dream DDCS-Expert - When the Percent Number Is Blue,We Can Edit SRO; When the Percent Number Is Blue,We Can Edit SJR

Digital Dream Standalone Motion Controller DDCS-Expert Users ManualPage-39
Figure 5-5 When the percent number is Blue,we can edit SRO
Figure 5-6 When the percent number is Blue,we can edit SJR
5.1.1.3 SJR/Jog Step
When the controller mode is CONT or MPG, it is “ SJR ”; When the controller mode is STEP,it
is “ Jog Step ”.
When in the CONT or MPG mode, By the Rotary button(Knob) or the and
keys, we can shift among the different colums. We move the cursor, select SJR and enter, the
percent number becomes blue, then we can use the knob or the Up / Down keys to edit the
numbers. The percent number increase or decrease in 1%,range is 0% - 120%.
After the setting done, don’t forget to press Enter to active the SJR.