Digital Dream DDCS-Expert - Clear the Working Record

Digital Dream Standalone Motion Controller DDCS-Expert Users ManualPage-79
Press F2, the system will export the working record to USB stick and named it as “ PRO-
CESS_MSG.txt ”.
Press F1,The System clear all the record.
No.: The Processed G-code file Number;
Name: The G-code file name;
Total Time: The according G-code file processing time;
No.: The processing times of the according G-code file;
Start date: The G-code file start processing time;
Current File: The current G-code file,if you press G-code file, system will process the current
file.
Figure 5-115 Save the record to U Disk
Figure 5-116 Clear the working record