Digital Dream DDCS-Expert - Middle Point Calculation; Middle Point for Lines

Digital Dream Standalone Motion Controller DDCS-Expert Users Manual
Page-69
DDCS-Expert Controller can support two kinds function:
1) Find a middle point for a line: find the Middle point from two points for X or Y axis. And set
the middle point as the Zero in the current workpiece coordinate ( G54 - G59 ) ;
2) Find a middle point for the Arc:find the Middle from 3 points. And set the middle point as
the Zero in the current workpiece coordinate ( G54 - G59 ) ;
5.1.11 Middle
Figure 5-94 Press F4 key to Middle Page
Figure 5-95 MIddle Page