Digital Dream DDCS-Expert - Break Run (Breakpoint Resume)

Digital Dream Standalone Motion Controller DDCS-Expert Users Manual
Page-58
As for the breakpoint resume function, we have 3 kinds breakpoint resume:
1) Start Line:Start from a specific line; the line number range from 1 - 10,000,000 lines;
2) Power Resume: Power Cut off recovery. When the power cutt off, the system can remem-
ber the line when power cut off,and create a breakpoint.
3) Pause Resume: When pause the processing, the system remember the line when pause,
and create a breakpoint.
In the Monitor Page and we Press F6 to enter into the “ Break Run ” page:
Figure 5-67 Clear All axis
Figure 5-68 “Break Run” Page
5.1.7 Break Run (Breakpoint Resume)