Digital Dream DDCS-Expert User Manual

Digital Dream Standalone Motion Controller DDCS-Expert Users Manual
Page-72
5.1.11.2 Find Middle Point in Y Axis
Now we set a start point is Y = 50, an end point is Y =1 00. We need to find a Middle from this
two point.
Step 1: We move the Y axis to Y = 50 :
Step 2: Press “ Set Y ” ( F3 )
Then the first point is saved.
Figure 5-101 X=50
Figure 5-102 First point saved

Digital Dream DDCS-Expert Specifications

General

Brand	Digital Dream
Model	DDCS-Expert
Category	Controller
Language	English