Operation
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 37
To interrupt sewing:
1. Release the foot pedal in pedal position 0:
The machine stops, needles and sewing feet are down.
To continue sewing:
1. Press the foot pedal forwards in pedal position +1:
The machine continues to sew.
To sew over thickened seams:
1. Switch on the elevated sewing foot stroke with the knee lever
( Setting quick stroke adjustment, p. 32).
To change the stitch length:
1. Switch on the 2nd stitch length using the key for the quick
function ( Quick functions on the keypad, p. 33).
To increase the thread tension:
1. Switch on the auxiliary thread tensioner using the key for the
quick function ( Quick functions on the keypad, p. 33).
To sew intermediate bar tacks:
1. Sew backwards with the stitch adjustment lever
( Sewing backwards with the stitch adjustment lever
(optional), p. 31)
or with the quick function key
( Quick functions on the keypad, p. 33).
To finish a seam:
1. Press the foot pedal back completely in pedal position -2:
The machine sews the end bar tack, and the thread cutter
cuts the thread.
The machine stops, needles and sewing feet are up.
2. Remove the sewing material.
To Next Page
Loading...
Need help?
General
