Settings via the software
Operating Instructions 867-M PREMIUM - 00.0 - 02/201582
Fig. 54: Softkey menu
2. Press the key.
The following display appears:
Fig. 55: Copying the program
The controller displays the next free program number.
3. Press OK to load the program number.
Or:
Select another program number using
/ or input a
program number using the keypad keys 0 - 9 and then press
OK.
The program number is loaded.
The following display appears, with the program number
flashing:
Fig. 56: Display after specifying the program number
4. Load the desired changes into the new program.
5. Press the ESC key.
The controller exits Programming mode and reverts to Auto-
matic mode.
To Next Page
Loading...
