DURKOPP ADLER 967 Instruction Manual

Aligning the needle bar linkage
Service Instructions 967 - 02.0 - 12/2015
47
9 Aligning the needle bar linkage
The adjustment requires that the axial movement of pins and shafts run-
ning in plain bearings be restricted correctly ( p. 18).
9.1 Moving the needle bar linkage sideways
Proper setting
When the stitch length is set to 0 and the value set on the handwheel scale
is
90°:
 Need
le bar (4), sewing foot bar (5) and presser foot bar (6) are all in a
line.
Cover
• Upper covers ( p. 11).
• Front cover (  p. 12).
WARNING
Risk of injury!
Crushing injuries from moving parts.
Switch off the machine before aligning the needle
b
ar linkage.

DURKOPP ADLER 967 Specifications

General

Brand	DURKOPP ADLER
Model	967
Category	Sewing Machine
Language	English