Maintenance
Service Instructions 967 - 02.0 - 12/2015
87
16.2 Lubricating the needle bar
For lubricating the machine, use only lubrication oil DA-10 or oil of equiv-
alent quality with the following specifications:
• Viscosity at 40° C: 10 mm
2
/s
• Flash point: 150° C
DA-10 can be obtained from DÜRKOPP ADLER AG sales offices using
t
he following part number:
The special grease for lubricating the machine
components is provided in
the accessory pack. It can also be obtained from DÜRKOPP ADLER AG
sale
s offices using the following part number:
WARNING
Risk of injuries due to contact with oil!
Contact with oil can cause irritation, rashes, aller-
gies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
contact with
oil occurs.
ACHTUNG
Risk of environmental damage from old oil!
Incorrect handling of old oil can result in severe
e
nvironmental damage.
ALWAYS observe the legally prescribed
re
gulations for handling and disposal of mineral oil.
Take care to ensure that oil is NEVER spilled.
Container Part number
250 ml 9047 000011
1 l 9047 000012
2 l 9047 000013
5 l 9047 000014
Part number
Grease Gun (without grease) 9401 000038
Special Grease 50 g 9047 098004
To Next Page
Loading...
Need help?
General
