Adjusting the Ink Capture Settings
Location Description
Vertical – Top Left
Default
The Mimio Interactive bar is mounted vertically and aligned with the
top left corner of the whiteboard (maximum size is 4’ tall x 8’ wide).
Vertical – Top Right The Mimio Interactive bar is mounted vertically and aligned with the
top right corner of the whiteboard (maximum size is 4’ tall x 8’ wide).
Vertical – Bottom Left
The Mimio Interactive bar is mounted vertically and aligned with the
bottom left corner of the whiteboard (maximum size is 4’ tall x 8’
wide).
Vertical – Bottom
Right
The Mimio Interactive bar is mounted vertically and aligned with the
bottom right corner of the whiteboard (maximum size is 4’ tall x 8’
wide).
Horizontal – Top Left The Mimio Interactive bar is mounted horizontally and aligned with the
top left corner of the whiteboard (maximum size is 8’ tall x 4’ wide).
Horizontal – Top
Right
The Mimio Interactive bar is mounted horizontally and aligned with the
top right corner of the whiteboard (maximum size is 8’ tall x 4’ wide).
Horizontal – Bottom
Left
The Mimio Interactive bar is mounted horizontally and aligned with the
bottom left corner of the whiteboard (maximum size is 8’ tall x 4’
wide).
Horizontal – Bottom
Right
The Mimio Interactive bar is mounted horizontally and aligned with the
bottom right corner of the whiteboard (maximum size is 8’ tall x 4’
wide).
This feature is not necessary for MimioTeach. When using MimioTeach with
MimioCapture, the MimioTeach bar is always attached to the MimioCapture tray. When
using MimioTeach without MimioCapture, the MimioTeach bar can be mounted
anywhere on the whiteboard.
To adjust the pen settings
1. Click Pens.
The Pens dialog box appears.
2. Choose the MimioCapture or Mimio Capture Kit pen to adjust from the Pen list.
3. To adjust the line thickness of the pen, drag the Pen Width slider.
Alternately, enter a value into the Pen Width box.
4. To adjust the pen color, select a color from the Pen Color palette.
For additional color choices, click More Colors.
5. Click OK.
To create a combined surface (MimioTeach)
1. Connect two or more MimioTeach devices and two or more MimioCapture devices to
your computer.
2. Set the surface size for each MimioTeach device.
135
To Next Page
Loading...