Eaton easyE4

2. Installation
2.6 Programming software license
To install the full version of the software, enter your 24-digit license key here.
If a valid key is not entered during installation, the software will be
installed in demo mode.
You can add a license key later on – please refer to → Section "Adding a
license key later on", page 96.
Fig. 48: Step 4 Destination folder
Shows the path where the program files will be stored.
You can click on Browse... to set a different storage location where you want the
programming software easySoft 8 to be installed.
Fig. 49: Step 4.1 Changing the destination folder
100
easyE402/24 MN050009ENEaton.com