10. easyE4 communication Connection to other devices
10.5 easyProtocol V1
CAUTION
INTERFERENCES
The values specified in the technical data, as well as the device's elec-
tromagnetic compatibility (EMC), cannot be guaranteed if the following
are used: unsuitable cables, improperly assembled and terminated
cables, and/or wiring that does not conform to the applicable stand-
ards.
Only use cables assembled and terminated by professionals.
The cables being used must be assembled and terminated as required
by the port/interface description in this document.
When wiring the devices, follow all instructions regarding how to wire
the corresponding port/interface.
All general Directives and standards must be complied with.
Only possible with easySoft 8.
682
easyE402/24 MN050009ENEaton.com
To Next Page
Loading...
