Name: Eaton easyE4
Brand: Eaton
Rating: 4 (1 reviews)

To Next Page

To Previous Page

10. easyE4 communication Connection to other devices

10.17 Modbus TCP

Device information tab

Fig. 353: Device information tab

Expansion parameter tab

The Expansion parameter tab can be used to configure the relevant Modbus TCP

parameters

for the Modbus module, i.e., for the Modbus TCP server.

Modbus communication occurs either via a fixed IP address or through the DNS

name in the domain name system (DNS).

Fig. 354: Expansion parameter tab for Modbus TCP servers

IP address

This is where the IP address of the Modbus TCP server is set. The default setting is:

0.0.0.0.

The IP address must have the same network as the

Modbus TCP client (the easyE4 base device). Please refer to → "Basic information on

assigning IP addresses", page 117 as well.

easyE402/24 MN050009ENEaton.com

779

Eaton easyE4 User Manual

Other manuals for Eaton easyE4